LiNi0.5Mn1.5O4-based composite electrodes with improved properties prepared by a slurry spray deposition process

Abstract

Abstract A slurry spray deposition (SSD) process is utilized to prepare a LiNi 0.5 Mn 1.5 O 4 -based composite electrode supported on an aluminum foil. The spray deposition process is performed at room temperature through the atomization and deposition of the composite electrode slurry. A comparative LiNi 0.5 Mn 1.5 O 4 -based composite electrode is also prepared by the traditional blade coating method. The surface morphology and elements mapping of the electrodes are measured by scanning electron microscopy and energy-dispersive X-ray spectroscopy, respectively. The adhesion between the composite electrode layers and the aluminum foil is also tested. A parallel evaluation on the mechanical and electrochemical performances of the two kinds of electrodes is conducted. The SSD electrode exhibits improved adhesion, cycling stability and rate capability. Therefore, the SSD process is an effective way to fabricate advanced electrodes for high performance lithium ion cells.