Abstract
A polarizing laser mirror was made of an alternating sequence of low and high refractive index layers of titanium oxide using glancing angle deposition (GLAD). Large refractive index contrast and large birefringence, reaching 0.5 and 0.1, respectively, could be obtained from one single raw material by changing the deposition conditions. The laser mirror could withstand a train of 2.7ns, single-mode pulses at 680Hz, λ=1030 nm, and peak power density of 670 MW/cm2 when used as an output coupler of a passively Q-switched (Yb0.1Y0.9)3Al5O12 ceramic laser. The polarization extinction ratio was found to be better than 30dB both in continuous-wave and pulsed regimes. These results indicate that polarizing laser mirrors made from nanostructured thin films with GLAD, in addition to being simple to fabricate, can withstand high pulse energy density.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
