Abstract

We report on the design, fabrication, and implementation of grating-waveguide structures (GWS) for intracavity polarization and wavelength selection as well as wavelength tuning. The GWS discussed in this Letter is a combination of a low-index leaky-mode waveguide, a subwavelength diffraction grating, and a highly reflective mirror that was designed to operate in Littrow configuration. Using our device as the end mirror of an Yb:YAG thin-disk laser allowed the extraction of beams that exhibit an extremely narrow laser emission bandwidth of ≈25 pm FWHM and a high degree of linear polarization of 99±0.5%. Moreover, the GWS allows a wavelength tuning range from 1007 to 1053 nm. The high-power suitability and the low loss of the GWS was demonstrated by the intracavity use in an Yb:YAG thin-disk laser with an output power of 325 W in multimode operation (M(2)=6) and with 110 W in fundamental-mode operation (M(2)≈1.2), exhibiting optical efficiencies of 53.2% and 36.2%, respectively. An output power of 1.8 kW, corresponding to a power density of 125 kW/cm(2) on the grating, was achieved in further higher-power experiments.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call