Linearity and noise evaluation based analysis of extended source heterojunction double gate tunnel FET

Abstract

This research work evaluates a performance analysis of heterostructure (SiGe/Si) double gate extended source Tunnel FET (Hetero-ES-TFET) to enhance the analog performance, linearity and noise performance. At the source-channel junction, a Hetero-ES-TFET's source is extended into the channel to increase point and line tunneling in the device. The Hetero-ES-TFET exhibits a high ION/IOFF of 3.57 × 1012 and a maximum cut off frequency fT of 54.19 GHz for optimization of device structural parameters. This analysis is conducted using a calibrated SILVACO, technology computer-aided design (TCAD) simulator. The proposed structure includes evaluation of linearity and noise performance characteristics. Furthermore, a linearity analysis as a figure of merit was conducted for the proposed device under study, including different parameters such as 3rd order intermodulation distortion point (IMD3), 3rd order intermodulation intercept point (IIP3), 2nd and 3rd order voltage intercept point (VIP2 and VIP3). The proposed Hetero-ES-TFET has achieved an incredibly high ON current and low threshold voltage. The effect of increasing source width has been examined in this work while sub-threshold swing (SS) remains unchanged during the analysis. There is an improvement in threshold voltage and ION/IOFF value by using silicon-germanium (SiGe) as a source material.