Abstract
An analytical model is proposed to study the two-phase flow instabilities of in-phase and out-of-phase modes in boiling water reactors. This model, developed for parallel boiling channels with the void-reactivity feedback loop, takes into consideration the interaction between channels with different void fraction variations. Linear stability analysis in the frequency domain is performed to reveal the mechanisms of the instability. Stability boundaries for the system are obtained on the stability map. In the case of parallel two channels, two types of stability boundaries are found to exist on the stability map; one for the instability of the in-phase mode and the other for that of the out-of-phase mode respectively. It is found that the interaction between channels affects the instability of the out-of-phase mode. For a certain range of the void-reactivity coefficient, the void-reactivity feedback loop is found to be unstable in a certain region on the stability map, which has an effect on the stability of the in-phase mode. Froude number is important to the stability of the system, especially to the instability of the in-phase mode.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.