Linear Low Density Polyethylene/Poly(Vinyl Alcohol)/Kenaf (LLDPE/PVA/KNF) Composites: Effect of 3-(Trimethoxysilyl)Propyl Methacrylate as Silane Coupling Agent on Tensile and Morphological Properties

Abstract

The tensile properties and morphological studies of linear low density polyethylene (LLDPE)/poly (vinyl alcohol) (PVA)/kenaf (KNF) composites with and without 3-(trimethoxysilyl) propyl methacrylate (silane coupling agent) were investigated. The composites with different KNF loading (10, 20, 30, 40 phr) were prepared using a Thermo Haake Polydrive internal mixer at 150°C and 50 rpm for 10 min. The results indicated that composites with 3-(trimethoxysilyl) propyl methacrylate gives higher tensile strength and modulus but lower elongation at break than composites without. The presence of 3-(trimethoxysilyl) propyl methacrylate found to enhance the interfacial adhesion between LLDPE/PVA matrix and KNF fiber. Morphological studies on tensile fractured surfaces showed good adhesion between LLDPE/PVA matrix and KNF, and better dispersion of KNF for the composites with 3-(trimethoxysilyl) propyl methacrylate.