Abstract
The interaction of a cylindrical element of hot or cold gas (the “entropy spot”) with a shock wave is considered. An exact solution in the limit of weak spot amplitudes is elaborated, using the linear interaction analysis theory and the procedure of decomposition proposed by Ribner (Technical Report No. 1164, NACA, 1953). The method is applied to an entropy spot with a Gaussian profile. Results are presented for a wide range of shock Mach numbers, with a special interest at M1=2. The resulting vorticity field consists of a pair of primary counter-rotating vortices, as well as a pair of secondary vortices of opposite sign and weaker amplitude. An expression for the circulation in half a plane is derived and compared to existing results. The pressure field consists of a cylindrical acoustic wave which propagates away from the transmitted spot and an evanescent nonpropagative field confined behind the shock. For a hot spot, the cylindrical wave is a rarefaction wave on its forward front and a compression wave on its upstream propagating parts, and the nonpropagative field corresponds to a pressure deficit. The structure of the transmitted spot and the shock deformation are also discussed. The linear solution is compared with numerical simulation results for M1=2 and M1=4. The comparison shows qualitative and quantitative agreement when linear as well as nonlinear spot amplitudes are considered. Finally, the method is applied to the case of a constant spot with a tophat profile, and the results are compared to the case of a Gaussian spot. This paper also contains in the Appendix a general formulation of the linear interaction problem for the three kinds of plane waves (entropy, vorticity, and pressure waves) impinging upon a shock.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.