Linear and nonlinear melt rheology and extrudate swell of acrylonitrile‐butadiene‐styrene and organoclay‐filled acrylonitrile‐butadiene‐styrene nanocomposite

Abstract

AbstractMelt viscoelastic behavior and the die swell of Acrylonitrile‐Butadiene‐Styrene (ABS) and ABS/clay nanocomposites varying in organoclay loading were studied. A pronounced low‐frequency nonterminal behavior exhibited in linear viscoelastic experiments along with an apparent yield stress in transient startup flow tests suggested the existence of a network type, because of interconnection of rubber particles in ABS matrix. From the results of linear and nonlinear viscoelastic measurements, it was found that the incorporation of organoclay can lead to the formation of an additional network formed between organoclay tactoids that caused reduced temperature dependency of linear viscoelastic properties of the nanocomposite samples compared with ABS matrix. The swelling behavior of samples was interpreted using the results of stress relaxation experiments after cessation of steady shear flow. The great reduction in the die swell of nanocomposite samples could be explained in terms of great surface area and anisometric nature of organoclay tactoids and/or platelets, which promote energy consumption and less energy to be stored in chains. POLYM. ENG. SCI., 2010. © 2010 Society of Plastics Engineers