Abstract
CO2 adsorption is a promising strategy to reduce costs and energy use for CO2 separation. In this study, we developed CO2 adsorbents based on lightweight and flexible cellulose nanofiber aerogels with monolithic structures prepared via freeze-casting, and cellulose acetate or acetylated cellulose nanocrystals (a-CNCs) were introduced into the aerogels as functional materials using an impregnation method to provide CO2 affinity. The microstructure of the adsorbent was examined using scanning electron microscopy, and compression tests were performed to analyze the mechanical properties of the adsorbents. The CO2 adsorption behavior was studied by recording the adsorption isotherms and performing column breakthrough experiments. The samples showed excellent mechanical performance and had a CO2 adsorption capacity of up to 1.14 mmol/g at 101 kPa and 273 K. Compared to the adsorbent which contains cellulose acetate, the one impregnated with a-CNCs had better CO2 adsorption capacity and axial mechanical properties owing to the building of a nanoscale scaffold on the surface of the adsorbent. Although the CO2 adsorption capacity could be improved further, this paper reports a potential CO2 adsorbent that uses all cellulose-based materials, which is beneficial for the environment from both resource and function perspectives. Moreover, the interesting impregnation process provides a new method to attach functional materials to aerogels, which have potential for use in many other applications.
Highlights
Adsorption is an energy-efficient and low cost method for capturing CO2 (Pino et al 2016; Yu et al 2012)
The cellulose nanocrystals (CNCs) used for acetylation were fully characterized in our previous study with a width of 5.0 ± 1.5 nm and a length of 122.6 ± 53.3 nm (Butylina et al 2016)
The prominent peaks for the acetylated cellulose nanocrystals (a-CNCs) sample indicate that heterogeneous acetylation was successful
Summary
Adsorption is an energy-efficient and low cost method for capturing CO2 (Pino et al 2016; Yu et al 2012). Compared to the adsorbent which contains cellulose acetate, the one impregnated with a-CNCs had better CO2 adsorption capacity and axial mechanical properties owing to the building of a nanoscale scaffold on the surface of the adsorbent.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.