Abstract
In this article, we have investigated the combined role of nanopyramid (NP) array and metal nanoparticles (MNPs) in enhancing the light trapping ability and improving the photo-absorption of PEDOT:PSS/c-Si Hybrid Solar Cells (HSCs) using a 3D finite-difference time-domain (FDTD) method. A parametric optimization of the essential geometrical parameters of NPs and MNP is performed based on short circuit current density (Jsc). The optimization result reveals that maximum Jsc of 35.91 mA/cm2 is achievable with top textured NP (without MNPs) which is 24.38% higher than the planar counterpart. However, the absorption spectrum is broadened with the insertion of Al MNP at rear side of the HSC. This is also accompanied by almost two fold increase in Jsc to 41.71 mA/cm2 which is 44.47% higher the planar HSCs. The photovoltaic parameters such as Jsc, Voc, PCE and Fill Factor (FF) are calculated using the DEVICE software for NP and NP embedded with Al MNPs based c-Si Solar Cells. The physics at the interface of inorganic nanostructure and organic material layer is thoroughly described. In addition to this, we have tried to decode the underlying physics for the enhancement of photon absorption in nanopyramidal structures and MNPs structures through an extensive analysis of the photogeneration rate, electric field intensity, power absorption profiles, PCE and FF of nanopyramidal, nanopyramidal with MNP and planar HSCs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.