Light Stimuli-Responsive Superhydrophobic Films for Electric Switches and Water-Droplet Manipulation

Abstract

Fabrication of superhydrophobic films with large and sensitive deformed actuations driven by light stimuli for the emerging application fields such as biomimetic devices, artificial muscles, soft robotics, electric switches, and water-droplet manipulation remains challenging. Herein, a facile strategy is proposed to fabricate a light stimuli-responsive superhydrophobic film (LSSF) by integrating a bottom carbon nanotube/poly(vinylidene fluoride) (CNT/PVDF) layer, a middle chitosan (CS) layer, and a top superhydrophobic fumed silica-chitosan (SiO2/CS) layer modified with 1H,1H,2H,2H-heptafluorodecyltrimethoxysilane (FAS). Under near-infrared (NIR) light irradiation, the LSSF quickly bent toward the CS layer with a large bending angle (>200°), high sensitivity (∼7 °C change), and great repeatability (>1000 cycles), which was attributed to the significant difference in the coefficient of thermal expansion (CTE) between CS and PVDF and the water desorption-induced volume shrinking in the CS layer. Furthermore, the LSSF also exhibited superhydrophobicity with a high water contact angle of 165° and a low water sliding angle of 2.8°. Importantly, owing to the high light absorption of CNTs, the LSSF-based biomimetic flower was able to not only bloom under NIR light exposure but also normally work when applying sunlight irradiation. Thanks to the electric conductivity and excellent water repellency, the LSSF was capable of being designed as an electric switch to remotely turn on/off the circuit even under a watery environment, and the LSSF was further successfully applied in water-droplet manipulation. The findings conceivably provided a new strategy to fabricate light stimuli-responsive superhydrophobic films for versatile applications.