Abstract
Numerical calculations of ultraviolet to near-infrared absorption spectra by cadmium selenide quantum dots (CdSe QDs) doped in anodic aluminum oxide pores were performed using a finite-difference time-domain model. The height, diameter, and periodic spacing of the pores were optimized. Light absorption by the dots was enhanced by increasing the height and decreasing the diameter of the pores. When the height was less than 1 μm, visible light absorption was enhanced as the spacing was reduced from 400 nm to 100 nm. No enhancement was observed for heights greater than 6 μm. Finally, the optical mode coupling of the aluminum oxide and the quantum dots was enhanced by decreasing the pore diameter and periodic spacing and increasing the height. Laser ablation verified light absorption enhancement by the CdSe QDs. The experiments verified the improvement in the laser-induced damage ability with a nanosecond laser at a wavelength of 355 nm after aluminum alloy 6061 was coated with functional films and fabricated based on numerical calculations.
Highlights
With the shortage of traditional fossil fuel resources such as coal, oil, and natural gas, coupled with the fact that they will cause serious environmental pollution and the greenhouse effect, finding new energy sources to replace traditional fossil fuels has become a major issue for contemporary technology to solve
The fusion energy produced by laser-driven, controlled inertial confinement fusion (ICF) is valued by all countries for its rich fuel, clean materials, and the safety of fusion reactors
Representative examples include the large-scale laser tritium–deuterium fusion device built at Lawrence Livermore National Laboratory (LLNL)
Summary
With the shortage of traditional fossil fuel resources such as coal, oil, and natural gas, coupled with the fact that they will cause serious environmental pollution and the greenhouse effect, finding new energy sources to replace traditional fossil fuels has become a major issue for contemporary technology to solve. The world’s total proven reserves exceed 1373 billion tons, and the reserve production ratio is about 43 years. The world’s total reserves are 141 trillion cubic meters, and the reserve production ratio is about 66 years. The world’s total reserves are 1043.8 billion tons. The fusion energy produced by laser-driven, controlled inertial confinement fusion (ICF) is valued by all countries for its rich fuel, clean materials, and the safety of fusion reactors. Representative examples include the large-scale laser tritium–deuterium fusion device built at Lawrence Livermore National Laboratory (LLNL)
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
