Abstract
After preparing LiFePO4 (LFP) and activated carbon (AC) layers on each face of an aluminum current collector, through-holes with the pore diameter of 22 µm and opening rate of 0.5% were formed on the electrode. A half cell was fabricated with the electrode and two lithium (Li) metal electrodes. The half-cell exhibited much improvement of rate performance. Because the LFP/AC electrode having no through holes and LFP electrode did not exhibit the improvement, it was considered that energy and Li+ transfer occurred between LFP and AC layers, and Li+ passed through the holes from AC to LFP.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have