Life cycle integrated flow simulation for hydraulic fracturing horizontal wells in shale gas reservoirs

Abstract

The distribution of matrix pressure and water saturation during the fracturing and shut-in period significantly impacts shale gas production. However, traditional numerical simulations primarily focus on the production period, often overlooking the impact of fracturing and shut-in on the seepage field and production rates. This study uses the dual-porosity/dual-permeability-embedded discrete fracture model (DPDK-EDFM) to characterize matrix mixed wettability and the natural/hydraulic fracture geometry. A multiscale numerical simulation model is constructed to encompass the whole life cycle of shale fracturing, shut-in, and production. The model provides a comprehensive understanding for considering the changes in rock properties and the diverse migration mechanisms. Subsequently, the life cycle model is used for sensitivity analysis on capillary pressure, shut-in time, and fracturing fluid volume. The findings demonstrate that (1) capillary pressure strongly impacts flowback rate. As surface tension increases from 0 to 72 mN/m, the flowback rate decreases from 113.00% to 68.25%. (2) The shut-in time strongly affects the uniformity of pressure distribution. (3) The fracturing fluid volume is directly proportional to the rise in formation pressure. This innovative model provides a robust framework for simulating and analyzing the seepage field behavior of shale gas reservoirs throughout the life cycle. Furthermore, through a comprehensive investigation of the main controlling factors, this study provides valuable insights into the efficient development of shale gas reservoirs, carrying both theoretical and practical significance.