Abstract

BackgroundBio-jet fuels are emerging as a valuable alternative to petroleum-based fuels for their potential for reducing greenhouse gas emissions and fossil fuel dependence. In this study, residual woody biomass from slash piles in the U.S. Pacific Northwest is used as a feedstock to produce iso-paraffinic kerosene, through the production of sugar and subsequent patented proprietary fermentation and upgrading. To enhance the economic viability and reduce the environmental impacts of iso-paraffinic kerosene, two co-products, activated carbon and lignosulfonate, are simultaneously produced within the same bio-refinery. A cradle-to-grave life cycle assessment (LCA) is performed for the residual woody biomass-based bio-jet fuel and compared against the cradle-to-grave LCA of petroleum-based jet fuel. This paper also discusses the differences in the environmental impacts of the residual biomass-based bio-jet fuel using two different approaches, mass allocation and system expansion, to partition the impacts between the bio-fuel and the co-products, which are produced in the bio-refinery.ResultsThe environmental assessment of biomass-based bio-jet fuel reveals an improvement along most critical environmental criteria, as compared to its petroleum-based counterpart. However, the results present significant differences in the environmental impact of biomass-based bio-jet fuel, based on the partitioning method adopted. The mass allocation approach shows a greater improvement along most of the environmental criteria, as compared to the system expansion approach. However, independent of the partitioning approach, the results of this study reveal that more than the EISA mandated 60% reduction in the global warming potential could be achieved by substituting petroleum-based jet fuel with residual woody biomass-based jet fuel. Converting residual woody biomass from slash piles into bio-jet fuel presents the additional benefit of avoiding the impacts of slash pile burning in the forest, which results in a net negative impact on ‘Carcinogenics’ and ‘Respiratory effects’, and substantial reduction in the ‘Smog’ and ‘Ecotoxicity’ impacts. The production of woody biomass-based bio-jet fuel, however, did not show any significant improvement in the ‘Acidification’ and ‘Eutrophication’ impact categories.ConclusionsThe study reveals that residual woody biomass recovered from slash piles represents a more sustainable alternative to petroleum for the production of jet fuel with a lower impact on global warming and local pollution. Future research should focus on the optimization of chemical processes of the bio-refinery to reduce the impacts on the ‘Acidification’ and ‘Eutrophication’ impact categories.

Highlights

  • Bio-jet fuels are emerging as a valuable alternative to petroleum-based fuels for their potential for reducing greenhouse gas emissions and fossil fuel dependence

  • To undertake a comprehensive environmental assessment, this paper presents the life cycle impact assessment (LCIA) categories included in the Tool for Reduction and Assessment of Chemicals and other Environmental Impacts (TRACI), including climate change, acidification, eutrophication, smog formation, respiratory effects, carcinogenics, noncarcinogenics, and ecotoxicity

  • Two different approaches were used to deal with the co-products, system expansion and mass allocation

Read more

Summary

Introduction

Bio-jet fuels are emerging as a valuable alternative to petroleum-based fuels for their potential for reducing greenhouse gas emissions and fossil fuel dependence. Growing interest in renewable biomass-based bio-fuels for mitigating climate change and reducing fossil fuel dependence is driving the need for a better understanding of their environmental impacts [1,2,3,4]. Requirements for biojet fuel are defined by the ASTM standards, which specify minimum energy density, freeze point temperature, sulfur and aromatics content, mercaptan concentration, aromatics content, fuel electrical conductivity, and flash point. To achieve these specifications, one of the pathways that have been explored consists of upgrading alcohols to drop-in bio-jet fuel, popularly known as the ‘Alcohol-to-Jet fuel’ (ATJ) pathway. In November of 2016, Alaska Airlines flew the first commercial flight, from SeaTac airport, using a 20% blend of bio-fuel produced via ATJ technology starting from residual woody biomass, demonstrating the feasibility of using the technology on a wood-based feedstock [6, 7]

Objectives
Methods
Results
Discussion
Conclusion
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.