Life cycle assessment of hot mix asphalt and zeolite-based warm mix asphalt with reclaimed asphalt pavement

Abstract

A comprehensive life cycle assessment of asphalt pavements was conducted including hot mix asphalt (HMA), warm mix asphalt (WMA) with the addition of synthetic zeolites, and asphalt mixes with reclaimed asphalt pavement (RAP). The environmental impacts associated with energy consumption and air emissions were assessed, as well as other environmental impacts resulting from the extraction and processing of minerals, binders and chemical additives; asphalt production; transportation of materials; asphalt paving; road traffic on the pavement; land use; dismantling of the pavement at the end-of-life and its landfill disposal or recycling. Monte Carlo simulations were also conducted to take into account the variability of critical input parameters. Taking into account the entire life cycle, the impacts of zeolite-based WMA pavements were almost equal to the impacts of HMA pavements with the same RAP content. The reduction in the impacts of WMA resulting from the lowering of the manufacturing temperature was offset by the greater impacts of the materials used, especially the impacts of the synthetic zeolites. Moreover, by comparing asphalt mixes with different RAP contents, it was shown that the impacts of asphalt mixes were significantly reduced when RAP was added. All endpoint impacts as well as climate change, fossil depletion and total cumulative energy demand were decreased by 13–14% by adding 15% RAP. A key advantage of WMA is the potentially greater use of RAP. Thus, the decrease in the impacts achieved by adding large amounts of RAP to WMA could turn these asphalt mixes into a good alternative to HMA in environmental terms.