Life cycle approach applied to the production of ceramic materials incorporated with ornamental stone wastes.

Abstract

The use of the ornamental stone wastes, such as the originated from granite or marble, has been the subject of technological studies that evaluated its application in ceramic and cement materials; however, some complementary assessments, such as its life cycle assessment, are still not well explored in the literature. Therefore, the objective of this study was to discuss the main environmental impacts related to the manufacture of ceramic specimens, comparing conventional production versus the production of specimens incorporated with ornamental stone wastes. For this, the life cycle assessment was conducted in accordance with ISO 14.040 and 14.044. For this research, the ornamental stone wastes from the municipality of Cachoeiro do Itapemirim-ES and clay from the municipality of Campos dos Goytacazes-RJ were used. The system was modeled, using the SimaPro 9.0 software and the Ecoinvent database 3.3, for the life cycle assessment of the ceramic specimens and the potentiality regarding the use of ornamental stone wastes in ceramic materials using alternative input energy for burning, contributing to the effectiveness of the solid wastes reuse by the ceramic industry. The evaluation identified that the ornamental stone wastes incorporated into the ceramic specimens had significant potential in reducing environmental impacts and that the alternative input energy in burning stage makes them even more relevant. The study points out as the main result, the reduction of 35.74% of the impacts related to the category of the emission of greenhouse gases, and scarcity of mineral resources, 14.83% reduction, when compared to specimens to conventional brick production and alternative brick production, which emphasizes that the ceramic materials with wastes contribute to the mitigation of impacts.