Abstract
LiFePO4/Carbon nanocomposite was synthesised by two-step procedure ̶ hydrothermal synthesis in the presence of ascorbic acid followed by mixing of the product with citric acid and heating at 600°C under a reducing atmosphere. During the first-step, slab or cuboid-shaped LiFePO4 particles were formed with sizes of ∼100–150nm in width and ∼300–600nm in length. The second-step produced deformed slab or cuboid-like LiFePO4/Carbon nanocomposite with shapes somewhat resembling that of the precursor. The electrochemical properties were examined by electrochemical impedance spectroscopy (EIS) and potentiostatic intermittent titration technique (PITT) at a series of equilibrium potentials within the voltage range 2.7–4.2V. From the PITT measurements of cathodes with two thicknesses, the LiFePO4/Carbon nanocomposite exhibits a specific discharge capacity of 150.3mAh/g and 164.3mAh/g, for 9.4μm and 6.9μm thickness, respectively. The current relaxation measurements also showed that the kinetics of Li-ion transfer depends strongly on the phase composition; in the solid-solution regions the Li-ion kinetics is dominated by diffusion whereas in the two-phase region it is by phase transformation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.