LES of Premixed Turbulent Combustion Using Filtered Tabulated Chemistry

Abstract

AbstractThe filtered tabulated chemistry (FTACLES) approach utilizes data from pre-tabulated explicitly filtered 1D flame profiles for closure of the LES-filtered transport terms. Different methodologies are discussed to obtain a suitable progress variable c from detailed chemistry calculations of a methane/air flame. In this context, special focus is placed on the analytical modeling of the reaction source term using series of parameterized Gaussians. For increasing effective filter sizes in LES (i.e. including the flame thickening) the precise shape of the reaction rate profile becomes less and less relevant. In particular, it is shown that for one-step chemistry, a single Gaussian is sufficient to derive an explicitly expressible 1D flame profile with a prescribed laminar flame speed and thermal flame thickness. The resulting artificial flame profile is shown to have similarities with profiles based on carbon chemistry and detailed reaction mechanisms. Next, the behavior of the filtered c-transport equation is analyzed and several possible closure methods are compared for a wide range of filter widths. It is shown that the unclosed contribution of the filtered diffusion term can be combined with the subgrid convection term, thus simplifying the FTACLES formulation. The model is implemented in OpenFOAM and validated in 1D for a variety of LES filter sizes in combination with artificial flame thickening. A power-law-based wrinkling model is modified for use with artificial flame thickening and combined with the FTACLES model to enable 3D simulations of a premixed turbulent Bunsen burner. The comparison of 3D Large Eddy Bunsen flame simulations at increasing levels of turbulence intensity shows a good match to experimental results for most investigated cases. In addition, the results are mostly insensitive to the variation of the mesh size.