Lead-free CsCu2I3 thin films prepared by one-step chemical vapor deposition method for ultraviolet photodetector

Abstract

In recent years, inorganic lead-free perovskite materials have garnered attention for their non-toxicity, high carrier mobility, and strong light absorption capabilities, showing promising application prospects in photoelectric sensing. CsCu2I3 perovskite has been mentioned as one of the representatives and as a potential material for short-wavelength optoelectronic devices. This study employs a one-step chemical vapor deposition (CVD) process to fabricate CsCu2I3 thin films, which exhibit a vibrant yellow emission at 560 nm. Ultraviolet photodetectors utilizing CsCu2I3 films demonstrate an exceptional responsivity and a detectivity of 1.43 A/W and 1.15 × 1012 Jones (254 nm, 5 V bias), along with rapid response times (trise ≈ 50 ms, tdecay ≈ 70 ms). Moreover, this work examines the factors affecting device performance, including wavelength, operating voltage, and film thickness. It presents a straightforward, ecofriendly CVD method for producing lead-free perovskite films and optoelectronic devices, which has significant implications for the development of lead-free perovskite-based photoelectric technologies.