Abstract
Environment-friendly lead-free piezoelectric materials with excellent piezoelectric properties are needed for high-frequency ultrasonic transducer applications. Recently, lead-free 0.915(K0.45Na0.5Li0.05)NbO3-0.075BaZrO 3-0.01(Bi0.5Na0.5)TiO3 (KNLN-BZ-BNT) textured piezo- electric ceramics have high piezoelectric response, superior thermal stability, and excellent fatigue resistance, which are promising for devices applications. In this work, the KNLN-BZ-BNT textured ceramics were prepared by the tape-casting method. Microstructural morphology, phase transition, and electrical properties of KNLN-BZ-BNT textured ceramics were investigated. High-frequency needle-type ultrasonic transducers were designed and fabricated with these textured ceramics. The tightly focused transducers have a center frequency higher than 80 MHz and a -6-dB fractional bandwidth of 52%. Such transducers were built for an f -number close to 1, and the desired focal depth was achieved by press-focusing technology associated with a set of customer design fixture. Its lateral resolution was better than [Formula: see text] by scanning a 15- [Formula: see text] tungsten wire target. These promising results demonstrate that the lead-free KNLN-BZ-BNT textured ceramic is a good candidate for high-frequency ultrasonic transducer applications.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE transactions on ultrasonics, ferroelectrics, and frequency control
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
