Abstract
Demolition of a steel railway bridge was carried out by nine workers using flame-torch cutting. The air in the breathing zone of the workers contained from 2 to 38 mg of lead/m3, which is a very high level in comparison with the Dutch exposure limit of 0.15 mg/m3 (8-h time-weighted average). Without very effective respiratory protection these concentrations may result in acute lead poisoning. Upwind of the flame-torch exposure the level was below the exposure limit, whereas downwind lead concentrations of up to ten times the exposure limit were observed. Although filtering facepieces were used by the workers, average blood lead concentrations of about 4.5 mumol/l were rapidly attained. Possibly under these work conditions this value represents a maximum concentration attainable in blood. After termination of the exposure, there was a fast decrease of lead in the blood. This finding indicates that lead was mainly present in rapidly exchangeable compartments like blood. No stable correlation between the concentration of lead in blood and the concentration of zinc protoporphyrin in blood was found.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Scandinavian Journal of Work, Environment & Health
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
