Abstract
Potential exposures among repair technicians engaged in vehicle resurfacing operations prior to spray painting have not been thoroughly characterized. Environmental and personal air monitoring conducted in the State of Rhode Island have shown that automotive repair technicians may be exposed to metal particulates in sanding dust and methylene chloride vapors during vehicle paint removal operations. Hand wipe samples demonstrated that metals in sanding dust adhered to the hands of workers throughout the duration of the work day and were available for incidental ingestion from the handling of food/nonfood items and hand-to-mouth contact. A blood lead (PbB) screening effort among 21 workers at 2 facilities showed that 4 non-/less-exposed workers had mean PbB levels at the U.S. geometric mean of 2.8 μg/dL, while 2 out of 9 (22%) dedicated vehicle repair technicians had PbB levels at or above 30 μg Pb/dL whole blood—the level for potential adverse reproductive effects. Methylene chloride exposures were also found to exceed the Occupational Safety and Health Administrations (OSHA) 8-hr time-weighted average (TWA) action level and permissible exposure limit (PEL) in a limited number of samples (120 and 26 ppm, integrated work shift samples). Our findings suggest that thousands of professional technicians and vocational high school students may be at increased risk of adverse reproductive and/or other systemic effects.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.