Abstract
To enhance the leaching of chalcopyrite concentrates, this study evaluated a new process for extracting copper using iodized solutions and sulfuric acid diluted in seawater without pressure or high temperatures. The work involved a leaching test carried out under various conditions by varying the concentrations of chloride ions, H2SO4, and an evenly distributed oxygen supply in an aeration system. It was demonstrated that Cl- ion addition could promote the chalcopyrite-leaching process. The leaching efficiency of copper reached 70% after 96 h. However, a chloride ion dosage excess can have the opposite effect on extraction, reducing copper recovery. XRD and SEM-EDS results showed that cuprous chloride (CuCl) was formed at high dosages (>0.5 M); meanwhile, at a lower dosage, elemental sulfur (S) was formed in the presence of sulfuric acid solution and seawater medium. In contrast, in an aerated system, surface roughness markedly increased due to continuous oxidation on the surface of the ore. This change in morphology and the high value of the redox potential, given by the aerated system and the acidic environment, allowed copper recovery of up to 70% after 96 h. The results showed that an aerated system is the most effective factor in chalcopyrite concentrate leaching.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.