Abstract
The original target utilization is only about 30% in the CIGS (Cu(In, Ga)Se2) thin film solar cell sputtering process. The remaining 70% of the target must be recycled to achieve sustainable use of the rare metals, In, Ga, and Se. It is therefore very important to establish spent CIGS target recycling technology to reduce environmental damage.High CIGS recovery was obtained in this study by autoclave leaching CIGS powder in a sulfate solution using H2O2 as the strong oxidant. The CIGS leaching mechanism was studied using XRD and SEM. H2O2 was first adsorbed onto the CIGS surface. Then copper–selenium compound was formed on the CIGS surface. The copper–selenium compound decomposition is the rate-controlling step in the CIGS leaching process. Nearly complete CIGS dissolution can be obtained by autoclave leaching at 140°C for 4h using 3M H2SO4 as the leaching agent and H2O2 as the oxidant. In this study, a direct recycling process combining leaching process and re-synthesis of CIGS nanoparticles was developed to recover CIGS materials for reinsertion into the CIGS supply chain. Mono-dispersed CIGS nano-particles with the mean particle size of 9nm can be obtained using spent CIGS target as raw materials.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have