Abstract
For aqueous zinc ion batteries (AZIBs), birnessite MnO2 (δ-MnO2) has been intensively used as one of the most potential cathode materials due to its layered structure, which is conducive to reversible insertion/extraction of zinc ions. However, δ-MnO2 has not been attained for zinc ion storage performance because of its inferior conductivity as well as the undesirable structural degradation upon charge/discharge cycling. Herein, we have designed two kinds of cathode materials of Cu0.06MnO2·1.7H2O (CuMO) and Bi0.09MnO2·1.5H2O (BiMO) with nanoflower structure for the first time by a facile one-step hydrothermal method, which will be applied for high-performance AZIBs.The pre-intercalated metal ions and water molecules serve as pillars to sustain the layered structures, improving the stability of these materials. Particularly, the CuMO may experience a replacement reaction except the zinc ion insertion/extraction to form metallic Cu during the cycling process, which can enhance the diffusion rate of Zn2+, thus resulting in an excellent electronic conductivity and exhibiting remarkable specific capacities. Furthermore, a pseudo-capacitance that is derived from the surface-adsorbed Cu2+and Bi3+ also contributes to the improved electrochemical performances. The reversible capacity of CuMO is estimated as 350 mAh g−1 at 0.5 A g−1, which is much higher than that of pure δ-MnO2 (190 mAh g−1 at 0.5 A g−1). However, BiMO demonstrates long-term cycling stability, maintaining a capacity of 114.5 mAh g−1 even after 1100 charged-discharged cycles at 1 A g−1. The capacity retention is found to be as high as 98.6%, which is much higher than that of pure δ-MnO2 (53.8%). This can contribute to the development of high-performance AZIBs and the application of metal ion pre-intercalation methods in other areas.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have