Abstract

The study about the low-temperature performance of lithium-ion batteries (LIB) is of great significance at extreme temperatures, such as polar scientific research, space exploration, deep-sea exploration, military fields, and so on. In this study, normal devices and symmetrical devices were fabricated by ternary Li(Ni0.5Mn0.3Co0.2)O2 as cathode and graphite as anode at 25 and −20 °C. The results show that the specific discharge capacity of normal device is up to 120 mAh g−1 at 1 C and 25 °C. The specific capacity and energy density at 0.2 C and −20 °C are 106.05 mAh g−1 and 376.53 mWh g−1, respectively, which can reach 92.82% of that at 1 C and 25 °C. The value of activation energy Ea of the interface reaction of the LIB is calculated to be 63.72 kJ/mol by the Arrhenius equation. When the temperature dropped from 25 to −20 °C, the lattice spacing of Li1−x(Ni0.5Mn0.3Co0.2)O2 hardly changed, while the lattice spacing (002) of graphite reduces 0.00248 Å. In addition, some cracks were observed on the charged cathode at −20 °C. We carried out quasi-in situ electrochemical impedance spectroscopy (EIS) when the voltages of normal device discharged to 3.8, 3.6, 3.4, 3.2, and 3.0 V. Unlike the relationship of voltage–resistance at 25 °C, the values of the series resistance (Rs), charge transfer resistance (Rct), and ion transfer resistance (Rit) gradually decrease as the voltage decreases at −20 °C. Compared with the resistance of the symmetrical device based on the anode at 25 °C, the values of Rs and Rit at −20 °C both obviously increase. The main reason of performance degradation for normal device at −20 °C is large ion transfer resistance and the decrease of lattice spacing of the graphite (002).

Highlights

  • The invention of lithium-ion batteries (LIB) has provided great convenience and benefits to us and the world, so John

  • Adding a heating device inside or outside of LIB can effectively increase the performance of LIB at low temperature, it will increase the cost and danger of the whole battery

  • A complete understanding of the reasons for the performance degradation of LIB at low temperature is of great significance for the step to improve the performance of LIB at low temperature [15]

Read more

Summary

Introduction

The invention of LIB has provided great convenience and benefits to us and the world, so John. The modification or substitution of anode materials (C, Ti, Li alloying, Si, and Ge-based anodes and composite anodes) [11], the modification or substitution of cathode [Li3 V2 (PO4 ) phosphates and LiNi1−x−y Cox Aly O2 oxides] [12], and the optimization of the composition of electrolytes [13] Another solution is to add a heating device and control system, such as adding a heating device outside the battery or battery pack, or adding a heating electrode inside the battery [14]. Compared with room temperature conditions, small coin batteries under low temperature conditions often can not fully and truly reflect various internal resistance, mass transfer, heat transfer, and performance of commercial high-capacity batteries. The EIS of symmetrical cells based on cathode or anode were studied at 25 and −20 ◦ C

Materials and Methods
Results and Discussion
25 The Rs and Rct of
Electrochemical
Conclusions based onon ternary
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call