Lattice Boltzmann Simulation of Natural Convection in a Differentially Heated Square Enclosure Containing Heat Generating Low‐Prandtl Number Fluid

Abstract

Lattice Boltzmann simulations were conducted for the free convective flow of a low‐Prandtl number (Pr = 0.0321) fluid with internal heat generation in a square enclosure having adiabatic top and bottom walls and isothermal side walls. The problem of free convection with volumetric heat source has represented itself in connection with advanced engineering applications, such as water‐cooled lithium–lead breeder blankets for nuclear fusion reactors and liquid metal sources of spallation neutrons for subcritical fission systems. A single relaxation time (SRT) thermal lattice Boltzmann method (LBM) was employed. While applying SRT, a D2Q9 model was used to simulate the flow field and temperature field. Results have been obtained for various Rayleigh numbers characterizing internal and external heating from 103 to 106. Flow and temperature fields in terms of stream function and isotherms in the enclosure were predicted for these cases. The temperature of the fluid in the enclosure was found higher than the heated wall temperature at high values of internal Rayleigh numbers. The internal heat generation affected the rate of heat transfer significantly as two convection loops are observed in the enclosure. The average Nusselt number at the heated and cold wall was determined for all the cases.