Abstract
Microbial biofouling on polymer surfaces can lead to their biodeterioration. This may result in deterioration of the surface, leading to cracking and fracturing. Fungal spores from Aspergillus niger 1957, Aspergillus niger 1988 and Aureobasidium pullulans were tested to determine their strength of attachment on three surfaces, p(γ-MPS-co-MMA), p(γ-MPS-co-LMA) and spin-coated poly(methyl methacrylate) (PMMAsc), using lateral force measurements. The results demonstrate that A. niger 1957 and A. niger 1988 spores were most easily removed from the p(γ-MPS-co-MMA) surface, which was the surface with the highest Ra value. The A. niger 1957 and A. pullulans spores were most difficult to remove from the PMMAsc surface, which was the hardest surface. A. niger 1988 spores were the most difficult to remove from p(γ-MPS-co-LMA), the most hydrophobic surface. The results with A. pullulans were difficult to elucidate since the spores bound to all three surfaces and were removed with similar rates of force. The lateral force results demonstrate that spore attachment to a surface is a multi-factorial process, and independent surface and microbial factors influence spore binding. Thus, each environmental scenario needs to be considered on an individual basis, since a solution to one biofouling issue will probably not translate across to other systems. This article is part of the theme issue 'Nanocracks in nature and industry'.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Philosophical transactions. Series A, Mathematical, physical, and engineering sciences
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.