Lateral deflections of slender RC columns under eccentric compression loading with different end conditions

Abstract

AbstractIn the literature, several methods have focused mostly on determining the lateral deflection of columns with pinned end conditions. This paper presents a powerful method that allows the calculation of lateral deflection for columns of different end conditions, with particular attention to reinforced concrete (RC) columns. By utilizing the moment–curvature relations, a numerical procedure to compute slopes and deflections of pin‐ended columns is proposed, in which the slopes and deflections are corrected via an efficient and fast technique. Accordingly, slopes and deflections of columns with different end conditions are determined via procedures that rely on a simple searching technique. The second‐order analysis is individually included in the calculations; therefore, the complexity arising from the direct impact of the axial load on the lateral deflection is averted. Therefore, the method has the potential for inclusion in many numerical models for different structural members. The equations derived via the developed method have identical responses to the expressions obtained via the exact methods. A series of numerical examples are presented to illustrate the applicability of the proposed method to RC columns with different loadings and end conditions. Finally, the proposed method is evaluated, and its accuracy is demonstrated via parametric verification. As the axial load increased, the lateral displacement increased somewhat. The greater the eccentricity is, the greater the lateral displacement. As the eccentricity increased, the failure mode of the RC column changed from compression failure to bending failure.