Abstract
We measured the increase in threshold currents due to lateral carrier diffusion in InGaAs/AlGaAs quantum-well ridge-waveguide laser diodes. The ridge stripes were fabricated by using both in situ monitored pure Cl2 reactive ion etching and selective wet etching to completely eliminate the spreading current in the conductive upper cladding layer while keeping the ridge sidewalls straight. After comparing the threshold data with a theoretical model, the ambipolar diffusion coefficient is found to be 22 cm2/s in the population-inverted InGaAs layer. This model is based on the calculated optical gain curve and the ambipolar carrier transport in the quantum-well and waveguiding layers. The dependence of carrier lifetime on the local carrier concentration is included in the calculation. Moreover, from another set of devices with the portions of the active layer outside the ridge stripes etched away, the surface recombination velocity is found to be around 1–2×105 cm/s.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.