Abstract
Laser thermal keratoplasty is currently performed with a pulsed Ho:YAG laser at 2.07 microns wavelength. Long-term stability depends critically on the coagulation depth of each cone and thus on emission wavelength (absorption in corneal tissue) and focusing, all contributing to controlled stable collagen shrinkage. To achieve this, a temperature range of 65 degrees to 90 degrees C is needed. A continuous wave laser source meets the coagulation requirements more effectively by avoiding tissue cooling by thermal diffusion as well as the peak temperatures of pulsed lasers, which counteracts the intended central corneal steepening. A continuous wave diode laser was developed, emitting at 1.885 microns with a maximal energy output of 450 mW. In a contact focusing application, the absorption depth in water as a function of wavelength was measured. Using laser parameters, comparable to those used for a pulsed Ho:YAG laser in contact mode, coagulation spots in human cornea were applied for the continuous wave diode laser. The macroscopic and microscopic effects of the diode laser coagulation on corneas in vitro and in situ were comparable to those of the Ho:YAG laser, if a comparable amount of total energy per spot was applied. Due to better optimized laser-collagen interaction, higher corrections and more stable clinical refractive effects appear achievable using the continuous wave diode laser.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have