Abstract
Microstructures of laser surface melted (LSM) and alloyed (molybdenum and tantalum) type 304L stainless steel have been studied. 6-ferrite was found to be the primary solidification phase for these alloys. Chemical analysis of the laser-processed layers indicated no compositional variation between the as-received and laser-processed layers in terms of major alloying elements, i.e. chromium and nickel. However, laser processing resulted in a lowered manganese content, by about 15%. Furthermore, TEM studies showed laser processing to introduce extensive amorphous Mn-Si precipitation into the microstructure.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.