Laser Powder Bed Fusion Process Parameters' Optimization for Fabrication of Dense IN 625.

Abstract

This paper presents an experimental study on the influence of the main Laser Powder Bed Fusion (PBF-LB) process parameters on the density and surface quality of the IN 625 superalloy manufactured using the Lasertec 30 SLM machine. Parameters’ influence was investigated within a workspace defined by the laser power (150–400 W), scanning speed (500–900 m/s), scanning strategy (90° and 67°), layer thickness (30–70 µm), and hatch distance (0.09–0.12 µm). Experimental results showed that laser power and scanning speed play a determining role in producing a relative density higher than 99.5% of the material’s theoretical density. A basic set of process parameters was selected for generating high-density material: laser power 250 W, laser speed 750 mm/s, layer thickness 40 µm, and hatch distance 0.11 mm. The 67° scanning strategy ensures higher roughness surfaces than the 90° scanning strategy, roughness that increases as the laser power increases and the laser speed decreases.