Abstract
Functionally graded bioactive glass coatings on bioinert metallic substrates were produced by using continuous-wave (CW) laser irradiation. The aim is to achieve strong adhesion on the substrates and high bioactivity on the top surface of a coating material for load-bearing implants in biomedical applications. The morphology and microstructure of the bioactive glass from the laser coating process were investigated as functions of processing parameters. Laser sintering mechanisms were discussed with respect to the resulting morphology and microstructure. It has been shown that double layer laser coating results in a dense bond coat layer and a porous top coat layer with lower degree of crystallinity than an enameling coating sample. The dense bond coat strongly attached to the titanium substrate with a ten microns wide mixed interfacial layer. A highly bioactive porous structure of the top coat layer is beneficial for early formation of a bone-bonding HCA layer. The numerical model developed in this work also allows for prediction of porosity and crystallinity in top coat layers of bioactive glass developed through laser induced sintering and crystallization.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.