Abstract
Dye-sensitized solar cells (DSSCs) are gaining a newfound interest thanks to their superior ability to harvest indoor light with efficiency higher than other photovoltaic technologies. This study reports, for the first time, the possibility of using laser-induced graphene (LIG) as a flexible counter electrode material for DSSCs. A flexible LIG (F-LIG) electrode was fabricated by direct laser writing of a polyimide film, without the need of a starting conductive substrate. The prepared electrodes showed a higher catalytic activity towards the reduction of I3−/I−with respect to a more expensive Pt-based counter electrode. Moreover, the F-LIG electrodes outperformed electrodeposited PEDOT as a catalytic material for reduction of a copper bipyridyl complex (Cu(II/I)(tmby)2TFSI2/1) electrolyte. The F-LIG based DSSCs showed an open circuit voltage as high as 0.94 V and an increase in photoconversion efficiency higher than 60% with respect to the PEDOT-based counterpart, stepping from 3.08% to 4.96%. Thanks to the easy one-step laser-based fabrication process, the LIG-based DSSC was integrated with a LIG-based supercapacitor (SC), obtaining a flexible energy harvesting and storage system that was able to self-charge both under simulated solar illumination and under indoor artificial illumination, appearing to be a promising energy source for the next generation of self-powered connected Internet of Things devices.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
