Abstract
A laser flash method developed for the measurement of thermal conductivity of solids was applied to liquids of low thermal conductivity. The sample liquid was sandwiched in between a small thin metal disk and a sample holder. When the laser beam is absorbed in the front surface of the metal disk, the temperature of the disk quickly rises about 2 K and heat then flows downwards through the sample liquid as one-dimensional heat flow. The thermal conductivity of liquid can be obtained from the temperature fall of the disk without employing any reference materials and also without measuring the thickness of the sample liquid layer. Thermal conductivities of water and toluene near room temperature were measured by this method with a mean deviation of 2.6%. This laser flash method may be applied to the measurement of the thermal conductivity of liquids such as molten salts at elevated temperatures.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
