Laser-driven ramp-compression experiments on the national ignition facility

Abstract

This report details the analyses and related uncertainties in measuring longitudinal-stress–density paths in indirect laser-driven ramp equation-of-state (EOS) experiments [Smith et al., Nat. Astron. 2(6), 452–458 (2018); Smith et al., Nature 511(7509), 330–333 (2014); Fratanduono et al., Science 372(6546), 1063–1068 (2021); and Fratanduono et al., Phys. Rev. Lett. 124(1), 015701 (2020)]. Experiments were conducted at the National Ignition Facility (NIF) located at the Lawrence Livermore National Laboratory. The NIF can deliver up to 2 MJ of laser energy over 30 ns and provide the necessary laser power and control to ramp compress materials to TPa pressures (1 TPa = 10 × 106 atmospheres). These data provide low-temperature solid-state EOS data relevant to the extreme conditions found in the deep interiors of giant planets. In these experiments, multi-stepped samples with thicknesses in the range of 40–120 µm experience an initial shock compression followed by a time-dependent ramp compression to peak pressure. Interface velocity measurements from each thickness combine to place a constraint on the Lagrangian sound speed as a function of particle velocity, which in turn allows for the determination of a continuous stress–density path to high levels of compressibility. In this report, we present a detailed description of the experimental techniques and measurement uncertainties and describe how these uncertainties combine to place a final uncertainty in both stress and density. We address the effects of time-dependent deformation and the sensitivity of ramp EOS techniques to the onset of phase transformations.