Laser Doppler vibrometry based on self-mixing effect

Abstract

In this paper, a simple, compact and low cost laser Doppler vibrometer is presented. It is simply composed of a laser diode (9 mm in diameter, 2 g of weight, emitting at 825 nm) and by a two-lens optical system designed to focus the laser radiation on the vibrating target. This sensor can measure target velocity. The working principle is based on the self-mixing effect that occurs in a semiconductor laser diode when the emitted radiation is back reflected toward the cavity and then re-introduced inside. The target velocity is calculated measuring the frequency of the peak of the spectrum of the signal generated by a photodiode mounted on the back facet of the laser diode. In this article, the design and the realisation of the vibrometer is reported. The self-mixing vibrometer has been calibrated in the range 0–300 mm/s, using a rotating disk covered with white paper. The effect of the angle of measurement and target distance are reported. Finally, the sensor has been compared with a commercial laser Doppler vibrometer using a vibrating surface as a target.