Laser cleaning of stone artefacts: a substitute or alternative method?

Abstract

Laser cleaning of ancient marble and stone monuments is nowadays a well-accepted procedure in conservation. Operators and specialists are presently divided between those giving maximum confidence to this method of cleaning and others who, in contrast, are strongly critical and emphasise possible drawbacks and damages caused by laser. As any other method of cleaning, laser also offers advantages but at the same time is limited by drawbacks. Most conveniently, it should be integrated with the other methods. On the basis of the above considerations, the authors are proposing a combined procedure using laser cleaning as a first step – in this way removing the relevant part of black gypsum encrustation – followed by chemical methods as a final step. The latter, conveniently, could be accomplished by means of anion exchange resins, better than ammonium carbonate. An experimental check-up was made of four different methods applied on three different lithotypes on the façade of the Florentine Cathedral. Laser, micro-sandblasting, ammonium carbonate and sodium EDTA were the cleaning methods compared, whilst Carrara marble, green Serpentine (Verde di Prato) and a red limestone were the three lithotypes. Results are commented by showing differences in the advantages and drawbacks among the different methods on the various lithotypes.