Abstract
AbstractTi surfaces covered with large sodium titanate nanorods act as efficient electrodes for energy conversion and environmental applications. In this study, sodium titanate nanorod films were prepared on a Ti substrate in a 5M NaOH aqueous solution followed by heat treatment. The morphological characterization and the crystal structures of the sodium titanate nanorods were investigated via scanning electron microscopy (SEM), X-ray diffraction (XRD), and energy dispersive spectroscopy (EDS). Thin amorphous sodium titanate layers formed during the alkali-treatment, and sodium titanate nanorods were obtained after heat treatment at a temperature of 700°C. The sodium titanate nanorods obtained at this temperature had a thickness of about 80 nm and a length of 1μm. The crystal structure of the sodium titanate was identified with the use of Na2Ti5O11. The nanorods were agglomerated at a temperature above 900°C, and large-scale nanorods formed on the Ti surface, which may be used for electrodes for energy conversion applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.