Large-area fabrication: The next target of perovskite light-emitting diodes* *Project supported by the Ningxia Key Project of Research and Development Plan (Grant No. 2020BDE03013).

Abstract

Perovskite materials show exciting potential for light-emitting diodes (LEDs) owing to their intrinsically high photoluminescence efficiency and color purity. The research focusing on perovskite light-emitting diodes (PeLEDs) has experienced an exponential growth in the past six years. The maximum external quantum efficiency of red, green, and blue PeLEDs has surpassed 20%, 20%, and 10%, respectively. Nevertheless, the current PeLEDs are still in the laboratory stage, and the key for further development of PeLEDs is large-area fabrication. In this paper, we briefly discuss the similarities and differences between manufacturing high-quality and large-area PeLEDs and perovskite solar cells. Especially, the general technologies for fabricating large-area perovskite films are also introduced. The effect of charge transport layers and electrodes on large-area devices are discussed as well. Most importantly, we summarize the advances of large-area (active area ≥ 30 mm2) PeLEDs reported since 2017, and describe the methods for optimizing large-area PeLEDs reported in the literature. Finally, the development perspective of PeLEDs is presented for the goal of highly efficient and large-area PeLED fabrication. It is of great significance for the application of PeLEDs in future display and lighting.