Large-Scale Preparation of Micro-Nanofibrous and Fluffy Propylene-Based Elastomer/Polyurethane@Graphene Nanoplatelet Membranes with Breathable and Flexible Characteristics for Wearable Stretchy Heaters.

Abstract

Effective personal thermal management is crucial for protecting human health during cold weather. Therefore, wearable heaters based on electric-heating membranes are one of the most promising devices to become essential appliances in our daily lives. The main challenge toward this goal is the development of electric-heating membranes with adequate breathable, flexible, and stretchable characteristics. In the work presented here, micro-nanofibrous fluffy electric-heating membranes were prepared by coating polyurethane/graphene nanoplatelet (PU@GNP) films onto melt-blown propylene-based elastomer (PBE) micro-nanofibrous membranes via a facile, cheap, and large-scale method consisting of a coating-compressing cyclic process. Investigation of the resulting PBE/PU@GNP membranes showed that the PU@GNP films were uniformly deposited onto the PBE micro-nanofiber surfaces, forming fluffy interconnected conducting channels. By applying a voltage of 36 V to the prepared PBE/PU@GNP membranes, the temperature increased to 69.7 °C, confirming excellent electric-heating features. Moreover, the porosity of the fabricated membrane could be tailored readily by adjusting the coating-compressing cycles. Benefiting from the conducting channels, the PBE/PU@GNP membranes exhibited efficiently regulated air permeability ranging from 212 to 60.2 mm/s, a prominent softness score of 53.8, and an excellent elastic recovery rate of 85.5%. These findings demonstrate that PBE/PU@GNP micro-nanofibrous fluffy membranes may well be suitable for application in electric-heating clothing. The cyclic coating-compressing preparation process may be attractive in industrial manufacturing.