Abstract

Two-dimensional molybdenum disulfide (MoS2) has been extensively investigated in the field of optoelectronic devices. However, most reported MoS2 phototransistors are fabricated using the mechanical exfoliation method to obtain micro-scale MoS2 flakes, which is laboratory- feasible but not practical for the future industrial fabrication of large-scale pixel arrays. Recently, wafer-scale MoS2 growth has been rapidly developed, but few results of uniform large-scale photoelectric devices were reported. Here, we designed a 12 × 12 pixels pixel array image sensor fabricated on a 2 cm × 2 cm monolayer MoS2 film grown by chemical vapor deposition (CVD). The photogating effect induced by the formation of trap states ensures a high photoresponsivity of 364 AW-1, which is considerably superior to traditional CMOS sensors (≈0.1 AW-1). Experimental results also show highly uniform photoelectric properties in this array. Finally, the concatenated image obtained by laser lighting stencil and photolithography mask demonstrates the promising potential of 2D MoS2 for future optoelectrical applications.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.