Large-Scale Indoor Localization Solution for Pervasive Smartphones Using Corrected Acoustic Signals and Data-Driven PDR

Abstract

With continuous and accelerated urbanization, a large number of location-based services (LBS) have shifted from outdoor to indoor. The pervasive smartphone-based localization has been the subject of extensive work, including signals, algorithms, technologies, solutions, and applications. However, no single ubiquitous technology or solution exists for performing indoor positioning similar to the global navigation satellite system (GNSS) in the outdoor environment. The aim of this work is to develop a practical, precise, and economic smartphone-based localization solution. In order to address the challenges of utilizing the limited audible-band acoustic signal in pervasive smartphone localization, i.e., signal detection, correction, and evaluation, we present a low-cost anchor hardware, two-step signal detection method, data-driven pedestrian dead reckoning (PDR), and robust positioning algorithm. Moreover, we further propose acoustic measurement compensation approaches and measurement quality evaluation and control strategy (MQECS) to improve the performance of position estimation. Six phones, including Huawei Mate9, P9 Plus, OnePlus 6, Honor 8, Mi 10, and Google Pixel 3 are used to evaluate the localization performance in three typical wide area indoor scenarios (i.e., convention center, parking lot, and dining-hall). The total testbed area is accumulated to more than 8,800 square meters. The experimental results demonstrate that the proposed method achieves average positioning accuracies of 0.34 m (static) and 0.67 m (dynamic). In addition, the results show that the overall performance, repeatability, and stability are superior for different scenarios and devices.