Large-scale and tunable transparent displays based on silver nanoparticles metasurface

Abstract

We report a transparent display based on a metasurface of silver nanoparticles (Ag NPs), consisting of a transparent substrate and a layer of Ag NPs deposited by a dielectric film. The Ag NPs metasurface is prepared by a simple and direct annealing process. It presents a deep transmission valley at the wavelength of λ = 468 nm and enables desired transparent display by projecting the monochromatic image onto the metasurface. We also demonstrate that the formed Ag NPs can be approximated as truncated nanospheres, which have obvious directional scattering properties, and can radiate most of the scattered energy into the backward hemisphere with a relatively large angular beamwidth (the full width at half maximum of the scattered intensity) of ∼90°. Therefore, the fabricated displays possess wide viewing angles and high brightness characteristics. Additionally, the transmission modes can be red-shifted to the wavelength of λ = 527 nm by controlling the thickness of the deposited dielectric film. This approach using traditional thin film deposition and moderate annealing processing techniques enables simple, low-cost, and scalable fabrication in large areas for transparent displays.