Abstract

Solid-state cooling based on the caloric effect of phase transformation materials has attracted considerable interest with the increased demand for energy-efficient and environmentally friendly cooling technologies. Here, we have systematically studied the microstructural evolution, martensitic transformation (MT) behaviors, and elastocaloric effect (eCE) of directionally solidified Ni35.5Co14.5Mn35Ti15 all-d-metal Heusler metamagnetic shape memory alloys. Electron backscatter diffraction (EBSD) analysis revealed the coexistence of Heusler-type 〈001〉-oriented dendritic crystal and Ti-poor interdendritic phase for as-solidified alloys. Upon homogenization annealing, the sample presents a columnar-like morphology with 〈105〉 textured five-layer-modulated (5 M) martensite along the growth direction. Besides, the multi-modulated martensite with 7 M and 8 M structures was identified by transmission electron microscopy (TEM). Using a unique technique of in situ digital image correlation (DIC) with the combination of infrared thermography, MT and eCE behaviors were studied. Ni35.5Co14.5Mn35Ti15 alloy yielded a large adiabatic temperature change (ΔTad) of 11.5 K with a low critical stress (σcr) of 38 MPa and a moderate stress hysteresis (Δσhy) of 54 MPa when subjected to uniaxial stress, resulting in the largest value of |ΔTad/σcr| = 0.31 K MPa−1. This improved eCE is attributed to the enhanced compatibility in the oriented polycrystalline alloy and the high mobility of the low-energy twin boundary in the multi-modulated martensite.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call