Large Eddy Simulation on the Effects of Coal Particles Size on Turbulent Combustion Characteristics and NOx Formation Inside a Corner-Fired Furnace

Abstract

Abstract The effects of pulverized coal particles’ sizes on the coal combustion characteristics are numerically studied in a laboratory-scale tangentially fired furnace. The turbulent gas flow and the coal particle motion are solved by employing the large eddy simulation (LES) and the discrete phase model (DPM). The mixture fraction probability density function (MF-PDF) is coupled to simulate the non-premixed pulverized coal combustion. It is found that the coal combustion efficiency is positively affected by the dispersion of coal powders. The particle dispersion and the coal combustion are augmented by the intensive impingement caused by the corner-injected flow. Large coal particles, with their greater inertia, enhance particle agglomerations, which limit the combustion of volatile and char. Accordingly, the average flame temperature decreases with the growing particle sizes. Also, the O2 concentration increases slightly because of the incomplete coal combustion, and the CO2 concentration decreases gradually. In contrast, the CO concentration increases markedly in the furnace center due to the presence of a reducing atmosphere. The NO concentration exhibits an exponential decline with the increased particle size. A relatively stable combustion and a relatively low NOx formation are acquired inside such a corner-fired furnace when the particle Stokes number is a little greater than 1.