Abstract

We present fluid flow and heat transfer of a slot jet impingement heat transfer at a small value of the nozzle-to-plate spacing at which a secondary peak in the Nusselt number is observed. Large eddy simulation has been performed with a finite-volume-based computational fluid dynamics code and using a dynamic Smagorinsky model. The optimum domain size and grid for large eddy simulation (LES) have been produced based on LES computations on a coarse mesh and Reynolds-averaged Navier–Stokes-based computations. Two inflow conditions, namely, using the vortex method and no perturbations, were compared. The present LES results, using the vortex method, capture the secondary peak in the Nusselt number better as compared to the case with no perturbations. Results show that mean velocity profile in the stagnation region deviates from the standard law of the wall. Further, large-scale vortical structures were observed near the location of the secondary Nusselt number peak. Increases in both the streamwise and wall normal turbulence fluctuations are observed near the secondary peak in the Nusselt number. The secondary peak in Nusselt number is found to be associated with the combined effect of flow acceleration and an increase in the turbulence kinetic energy.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.