Large eddy simulation of shock wave/boundary layer interactions in a transonic compressor cascade

Abstract

In this paper, large eddy simulation (LES) was performed to investigate the shock wave/boundary layer interaction (SBLI) phenomenon in transonic compressor cascades with a chord Reynolds number of 2.12 × 106. A comprehensive analysis was conducted on both the SBLI structures inherent to the transonic compressor cascade and the coherent vortex structures within the boundary layer. The underlying mechanisms of the shock-induced boundary layer transition and the shock low-frequency unsteadiness in the transonic compressor cascade were elucidated through spectral and dynamic mode decomposition (DMD) analysis. The results revealed that boundary layer separation induced by the SBLI cannot reattach, leading to the formation of large-scale coherent vortex structures. Spectral analysis revealed that the shock-induced boundary layer transition in the transonic compressor cascade was dominated by inviscid Kelvin–Helmholtz (K–H) and secondary instability mechanisms, characterized by a dimensionless Strouhal number of 0.06. Additionally, pressure signals showed the variations in sub-frequency from the separated shear layer to the main flow. The oscillation amplitude of the shock foot was significantly greater than that of the shock main body, and the oscillation frequency of the shock foot was consistent with the sub-frequency. The oscillation frequency of the shock main body coincided with that of the compression ramp and flat plate configurations. Finally, DMD modal analysis indicated that high-frequency modes were correlated with turbulent fluctuations in the boundary layer, while medium- and low-frequency modes corresponded to shedding motion in the separated shear layer and low-frequency motion of the shock. This work promotes the understanding of the complex flow mechanisms of SBLI in the transonic compressor cascades.